Azzurra Breve 3-Way Tri-flow Kitchen Tap Spray Hose
As a smaller version of the Azzurra, the Azzurra Breve is a very high quality 3 Way Tri-flow Kitchen Mixer Tap with a pull-out Spray Hose with dual spray settings. It makes the ideal solution for a 3 in 1 kitchen mixer tap by combining elegant design and superb functionality. The Azzurra Breve would be a welcome addition to a top quality home or workplace kitchen and uses separate water paths to ensure that the filtered water pathway is not mixed with any unfiltered water.
The filtered water is dispensed via the horizontal spout, which has a smooth swivel action to be positioned as required. The build quality of the Azzurra Breve 3 Way Tri-flow Tap is second to none with a very heavy solid brass construction with a durable chrome highly polished surface.
The swan-necked spray hose has a dual control feature for different spray variations and is controlled with via the ceramic cartridge lever, a mark of long-lasting great quality.
The full kit comes complete with flexible hoses and fitting parts. We offer a wide range of very high quality water filter systems you can purchase along with this stunningly elegant, modern and top quality 3 way tri-flow kitchen mixer tap with spray hose.
{Features}
Separate internal water paths so filtered water does not mix with hot and cold
Dual control swan neck professional spout for mixed water only
Quarter turn ceramic valve for filtered
Ceramic cartridge for mixed water
Horizontal spout for filtered water
Complete with flexible hoses and NRV's
Slight vertical movement between the spout and base to prevent early seizing up and stiffness of the spout over time
{Specification}
Weight - 5 kg
Height - 475 mm
Tap base hole size: 35 mm
Supplied with fixing accessories and 3 flexible hoses 1/2" male.
Supplied with tubing that is 1/2" BSP male. You can connect it up to any existing water filter but you will need a tap adaptor
- For 1/4" (6mm tubing) you need a 1/2” female to ¼” push fit tap adaptor
- For 3/8" (10mm tubing) you need a 1/2" female to 3/8" push fit tap adaptor.
- Both of which are standard plumbing parts - if you need them just ask us! These come supplied if you buy the tap with any of our water filter systems.
Water Pressure & Flow Chart
This tap will produce the following flow rates according to the incoming pressure on both hot and cold:
COLD/HOT
0.5 bar - 0.4L/M / 0.5 bar - 0.4L/M
1.0 bar - 1.6L/M / 1.0 bar - 1.4L/M
1.5 bar - 3.6L/M / 1.5 bar - 3.4L/M
2.0 bar - 5.6L/M / 2.0 bar - 5.6L/M
2.5 bar - 7.6L/M / 2.5 bar - 6.8L/M
Boxed Weight & Dimensions:
Weight: 4.69 kg
Length: 60 cm
Width: 38 cm
Height: 8 cm
It is therefore recommended that this tap only be used on a pressurized hot water system. It may be used on a gravity fed hot water system provided the incoming pressure produces a flow rate that is acceptable to you, or if the gravity fed hot water system is pumped and pressurized.
