Water Hardness (Total) Test Kit (HI-3812)

Product ID:

809

Price:£43.20

Quantity:

Want it by Monday, 23 June
Order within 4 hours 31 minutes 52 seconds

Hardness in water is mainly due to the presence of Calcium and Magnesium ions and each one contributes to the amount of total hardness.

Range: (0.0-30.0 mg/L) (0-300 mg/L)

Titration Method

Titration is used to find the concentration of an identified chemical in a solution (e.g., water).

In our standard Titration kits, there will be a Titrant solution that is added to the solution (e.g., water) to be tested to make it change colour. The Reagent is then added under monitored conditions.

Water Hardness Test Kit

The HI-3812 test kit tests the hardness level as mg/L (ppm) calcium carbonate, via an EDTA (ethylene-diamine-tetraacetic acid) titration. Range (0.0-30.0 mg/L) (0-300 mg/L).

During testing, when colour change is achieved, under careful conditions - usually using a burette – the reagent is added, drop by drop, until the solution turns to the colour required. The user will then count how many drops of reagent were used to achieve complete colour change. The number of drops used will determine the chemical concentration and results can be found in the manual included.

Water hardness has traditionally been defined as the capacity of water to precipitate soap. The ionic species in the water causing the precipitation was later found to be primarily calcium and magnesium. In the present, therefore, water hardness is actually a quantitative measure of these ions in the water sample. It is also now known that certain other ion species, such as iron, zinc and manganese, contribute to the overall water hardness. The measure and subsequent control of water hardness is essential to prevent scaling and clogging in water pipes.

The HI-3812 test kit is supplied with the following:

30 mL hardness buffer
10 mL calmagite indicator
120 mL EDTA solution
20 mL plastic beaker with cap and 50 mL plastic beaker with cap
1 mL syringe with tip