DW Light Commercial Direct Flow Reverse Osmosis Filter + Booster Pump (1,600 GPD)

Product ID:

713

Price:£394.99

Quantity:

Light commercial direct flow reverse osmosis water system with built in booster pump and LCD Controller with auto membrane flushing.

This is a high quality reverse osmosis water filter system which removes a wide range of harmful contaminants from your water including chlorine, heavy metals, fluoride, pesticides, bacteria, silt and microplastics. Purifying the water to almost zero (TDS) total dissolved solid. With 3 x 2.5" x 10" pre-filters along with a dual 800 GPD membranes with added booster pump for low pressure supply lines.

Fully assembled with built in auto flush computer with 2 probe dual display TDS meter.

Suitable for light commercial use where a lot a water is required producting over 250 litre per hour.

Simple construction and compact size make it easy to be transported and moved around quickly if required. Installed and connected to a water supply in practically any place

Ideal solution for applications that need a lot of purified water quickly, if you require 0 TDS we would advise to also get a pressure vessel to hold more di resin due to this systems speed.

Filtration:

Filter 1: Polypropylene cartridge - 5 micron Sediment Pre-Filter: For the removal of sediments, dirt, sand and rust.

Filter 2: Carbon block cartridge - Carbon Block Pre-Filter: removes chlorine and organic chemicals that contribute to bad taste and odours.

Filter 3: Polypropylene cartridge - 1 micron Sediment Pre-Filter: For the removal of sediments, dirt, sand and rust.

Filter 4: Membrane 2 x 800GPD - Reverse osmosis membranes are semi-permeable removing up to 99% of contaminants present in water including viruses, bacteria, heavy metals, fluoride, hormones, silica and salts.

Filter 5 : Post Active Carbon Filter - for the removal of poor taste and odour from tap water

Pump: 36V / 2.8A (not continuous duty)
Voltage: 240vac transformer to 24Vdc 2.8A
Transformer: 240vac transformer to 36Vdc
Solenoids: QF Solenoid valve 24V 3/8'' TUBE - 3/8''' TUBE
Computer Board: Premium 36V-2TDS
TDS Control: Inlet/Outlet

Our Reverse Osmosis Systems are shipped fully assembled complete with a comprehensive instruction manual for easy DIY installation with no plumbing experience required. Systems includes all the fitting accessories.

Please note: This reverse osmosis system is fitted with an intermittent use pump and not continuous duty pump (3-4hr run time and 15 min breaks)

{Whats in the box!}
The RO Systems includes

1 x Filter housing system with built in pressure gauge
1 x 2.5" x 10" 5 Micron pre filter
1 x 2.5" x 10" Carbon block cartridge
1 x 2.5" x 10" 1 Micron pre filter
2 x 800 GPD membrane
1 x 2.0" x 10" post active carbon filter
1 x Booster pump
1 x Premium LCD controller
1 x Membrane flush kit
1 x Solenoid valve
1 x Pressure gauge
1 x Filter housing spanners
1 x 3/8" tubing
1 x 1/4" drain tubing
1 x Drain saddle valve
1 x Feed water clamp
1 x Instruction manual

{Specification}

Supplied water temperature: 5 - 40 ° C
Min. Water pressure: 20 psi
Max. water pressure: 80 psi
Max. the salinity of water: 2000 ppm (up to 5000ppm on request)
Raw water connections: three types included in set:
Connection for 3/8" quick connect or 1/2" 3/4 '' BSP
Clean water supply hose: 3 / 8 ''
Drain to the sewer: 1/4 ''

Dimensions: Height 590 mm, Width 470 mm, Depth 310 mm

{Replacement Filters}

This System Replacement Filters

4 Stage RO Replacement Filter Kit - Dual Sediment

£16.98

800 GPD Reverse Osmosis Membrane (3113)

£79.99

Aicro Post Carbon Filter

£11.95

{Product Q&A}

Can I automate the system to switch on/off when IBC is full
Yes. you can use a float switch. The system has its own high pressure switch and booster solenoid, .when the float closes the pure water output the system goes into standby mode cutting off the booster pump and closing both the pure and waste water lines.

{Delivery Info}
We endeavor to process and despatch your orders as quickly as possible and orders placed before 1pm are normally despatched the same day to arrive next working day (Highlands and Islands deliveries normally take 1-2 days longer).

Your order will be delivered via a 3rd party courier or delivery service on a next working day delivery service. We recommend that you ensure you have received your order prior to booking any installers.

All orders come with full tracking details and you can keep an eye on your delivery by using the tracking button at the top of the website.