Vyair 4 Stage Reverse Osmosis Water Filter System (300 GPD)

4 Stage Reverse Osmosis Water Filter System producing 300 Gallons of Water Per Day

This is a high quality reverse osmosis water filter system which removes a wide range of harmful contaminants from your supply water like chlorine, heavy metals, fluoride, pesticides, bacteria, silt and microplastics. Purifying the water to almost zero (TDS) total dissolved solids.

This system can fit neatly in to your underink cupboard or in tight fit spaces. No plumbing skills are required as arrives with everything you need to install with full instructions.

Typical use of the 4 stage: Tropical & Cold Water Fish Keeping, Wine & Beer Making, Food Production

Benefits

Removing up to 99% of tap water contaminants including bacteria and viruses

Superior high capacity 10 inch sediment, carbon block and (GAC) granular activated carbon Pre-filters

Excellent reduction in total dissolved solids (TDS)

Ideal for collecting purified water for home use or aquarium systems

Can be used as a drinking water system when combined with our remineraliser filter

Features

Pre-assembled and supplied with all the fitting accessories

Includes a built in membrane flush system which reduces fouling to extend membrane life

Arrives with a built in pressure gauge as standard providing a visual on inlet water pressure

Can be floor standing or wall mounted

Filter Stages

Stage 1 - Sediment Pre-Filter: For the removal of sediments, dirt, sand and rust.

Stage 2 - Carbon Block Pre-Filter: removes chlorine and organic chemicals that contribute to bad taste and odours.

Stage 3 - GAC Pre-Filter: a bed of granular activated carbon that absorbs chlorine and organic chemicals to improve taste and odour.

Stage 4 - Membrane: Reverse Osmosis membranes are semi-permeable removing up to 99% of contaminants present in water including viruses, bacteria, heavy metals, fluoride, hormones, silica and salts.

{Whats in the box!}
The RO Systems includes

1 x 5 micron polypropylene pre filter
1 x Activated carbon block cartridge
1 x Granular Activated Carbon Pre-filter
1 x RO-3012-300 Membrane - RO Membrane Reduces heavy metals, salts, bacteria and viruses
1 x RO and Filter Housing Spanners
1 x 5M Tubing - 5 meters of 1/4" tubing
1 x 1200cc Flow Restrictor
1 x Flush Valve
1 x Auto Shut off Valve
1 x Drain Saddle Valve
1 x Feed Water Clamp
1 x Integrated Pressure Gauge

{More Info}
Manufacturers recommend 60 psi is required at the membrane for full production, not everyone's cold water is at 60 psi and 77 degrees F; therefore, you might get less than 50 GPD, perhaps 50% or even less if your pressure and temperature are very low! Please consider these factors before you finally decide on which system is best for you

System Specifications

System Dimensions mm – H 480 x W 375 x D 250
System Weight – 9kg
Inlet Feed Connection – 3/8" Pushfit
Outlet Feed Connection – 1/4" Pushfit

Filter Replacement

Pre-filters should be replaced every 6 months or 2500gallons (or when visibly dirty) . If any of your pre filters are exhausted, using the unit will put additional pressure on the membrane. Filters are much cheaper to replace than a damaged membrane, which are also available on the website.

{Downloads}


{Replacement Filters}


{Delivery Info}
We endeavor to process and despatch your orders as quickly as possible and orders placed before 1pm are normally despatched the same day to arrive next working day (Highlands and Islands deliveries normally take 1-2 days longer).

Your order will be delivered via a 3rd party courier or delivery service on a next working day delivery service. We recommend that you ensure you have received your order prior to booking any installers.

All orders come with full tracking details and you can keep an eye on your delivery by using the tracking button at the top of the website.