1. Home PageHome
  2. Email UsEmail Us
  3. Check Order StatusTRACK ORDER
  4. View Cart
    View Cart
  5. View CheckoutCheckout

Vyair 4 Stage Slim Reverse Osmosis Water Filter System + Di (50 GPD)

Vyair 4 Stage Slim Reverse Osmosis Water Filter System + Di (50 GPD)
4 Stage Reverse Osmosis Water Filter With Di4 Stage Reverse Osmosis Water Filter With Di4 Stage Reverse Osmosis Water Filter With Di4 Stage Reverse Osmosis Water Filter With Di4 Stage Reverse Osmosis Water Filter With Di4 Stage Reverse Osmosis Water Filter With Di4 Stage Reverse Osmosis Water Filter With Di
Product ID:
259
Price:£59.99




4 Stage Slim Reverse Osmosis Water Filter System + Di producing 50 Gallons of Water Per Day

This is a high quality "slim" reverse osmosis water filter system which removes a wide range of harmful contaminants from your supply water like chlorine, heavy metals, fluoride, pesticides, bacteria, silt and microplastics. Purifying the water to zero (TDS) total dissolved solids with the aid of the post di resin filter.

This system can fit neatly in to your underink cupboard or in tight fit spaces. No plumbing skills are required as arrives with everything you need to install with full instructions.

Typical use of the 4 stage di : Marine Fish Keeping, Autoclaves, Car/Window Cleaning, Vodka Production, Hydroponics. (Di systems are not suitable for drinking water - Please see other ranges)

Benefits

Removing up to 99% of tap water contaminants including bacteria and viruses

Superior high capacity 10 inch sediment, carbon block and (GAC) granular activated carbon Pre-filters

RODI systems benefit from a small post deionization process to filter mineral salts to guarantee 0ppm TDS

Ideal for collecting purified water for home use or aquarium systems

Features

Pre-assembled and supplied with all the fitting accessories

Includes a built in membrane flush system which reduces fouling to extend membrane life

Can be floor standing or wall mounted

Filter Stages

Stage 1 - Sediment Pre-Filter: For the removal of sediments, dirt, sand and rust.

Stage 2 - Activated Carbon Block Pre-Filter: removes chlorine and organic chemicals that contribute to bad taste and odours.

Stage 3 - Membrane: Reverse Osmosis membranes are semi-permeable removing up to 99% of contaminants present in water including viruses, bacteria, heavy metals, fluoride, hormones, silica and salts.

Stage 4 - Small DI Resin Post Filter: reduces Total Dissolved Solids (TDS) to 0ppm and designed as a final polisher for the production of pure water

The effectiveness and productivity of RO systems increase with greater water pressure and temperature. The actual flow rate (in GPD) of any reverse osmosis system depends on your home water pressure and temperature.

All reverse osmosis systems are shipped fully assembled, it is simple enough to insert filters and connect to a water supply and waste water drain.

Downloads section below for RO Unit Set Up, installation and maintenance guidance, and we provide technical and sales support.

{Whats in the box}
The RO Systems includes

1 x 5 micron polypropylene pre filter
1 x Activated carbon block cartridge
1 x RO-1812-50 Membrane - RO Membrane Reduces heavy metals, salts, bacteria and viruses
1 x DI Small Resin Stage (Resin included)
1 x RO and Filter Housing Spanners
1 x 5M Tubing - 5 meters of 1/4" tubing
1 x Flow Restrictor
1 x Flush Valve
1 x Drain Saddle Valve
1 x Feed Water Clamp

{More Info}
Manufacturers recommend 43 psi is required at the membrane for full production, no need for electrical pumps for low inlet water pressure however water temperature may effect pure water production rates.

System Specifications

System Dimensions mm – H 385 x W 357 x D 195
System Weight kg – 6.4
Inlet Connection – 1/4" Pushfit
Outlet Connection – 1/4" Pushfit

Filter Replacement

Pre-filters should be replaced every 6 months or 2500gallons (or when visibly dirty) . If any of your pre filters are exhausted, using the unit will put additional pressure on the membrane. Filters are much cheaper to replace than a damaged membrane, which are also available on the website.

{Downloads}


{Replacement Filters}


{Delivery Info}
We endeavor to process and despatch your orders as quickly as possible and orders placed before 1pm are normally despatched the same day to arrive next working day (Highlands and Islands deliveries normally take 1-2 days longer).

Your order will be delivered via a 3rd party courier or delivery service on a next working day delivery service. We recommend that you ensure you have received your order prior to booking any installers.

All orders come with full tracking details and you can keep an eye on your delivery by using the tracking button at the top of the website.

Recently Viewed