WaterRO quality compact reverse osmosis water filter system which removes a wide range of harmful contaminants from your supply water like chlorine, heavy metals, fluoride, pesticides, bacteria, silt and microplastics. Purifying the water to zero (TDS) total dissolved solids with the aid of the post di resin filter.
This system is compact in design (no frame) so not only keeps the costs down but can fit neatly in to your undersink cupboard or in tight fit spaces. No plumbing skills are required as arrives with everything you need to install with full instructions.
The filtration process begins with Inline QF 2.0" filter cartridges, which effectively remove sediment, chlorine, and other contaminants before water reaches the membrane. Water is then purified by the WR-1812-100 reverse osmosis membrane with a production capacity of 100 GPD. The final Deionization (DI) stage removes the remaining dissolved ions, delivering ultra-pure water!
Typical use of the 4 stage di : Marine Fish Keeping, Autoclaves, Car/Window Cleaning, Vodka Production, Hydroponics.
⚠ Notice: Systems utilizing DI resin are not suitable for drinking water.
Benefits
Removing up to 99% of tap water contaminants including bacteria and viruses
Compact framless design
RODI systems benefit from post deionisation process to filter mineral salts to guarantee 0 TDS
Ideal for collecting purified water for home use or aquarium systems
Features
Pre-assembled and supplied with all the fitting accessories
Filter Stages
Stage 1-2 - Inline QF 2.0" filter cartridges - Removes sediment, chlorine, and other contaminants
Stage 3 - Membrane: Reverse Osmosis membranes are semi-permeable removing up to 99% of contaminants present in water including viruses, bacteria, heavy metals, fluoride, hormones, silica and salts.
Stage 4 - Post DI Resin Post Filter: reduces Total Dissolved Solids (TDS) to 0ppm and designed as a final polisher for the production of pure water
The effectiveness and productivity of reverse osmosis systems increase with greater water pressure and temperature. The actual flow rate (in GPD) of any reverse osmosis system depends on your home water pressure and temperature.
All reverse osmosis systems are shipped fully assembled, it is simple enough to insert filters and connect to a water supply and waste water drain.
Filter Life (depending on usage)
Pre-Filters - 6-12 months
Membrane - 12-18 months
Post di resin - 6 months
{Whats in the box!}
WaterRO Compact 100 System includes
1 x 100 US gallon per day membrane
1 x Set of QF Inline filters
1 x Post Di Resin Chamber
1 x Feed Water Clamp
1 x Waste Water Clamp
1 x Filter Housing Wrench
1/4" Red Tubing
1/4" White Tubing
1/4" Blue Tubing
1 x Flow Restrictor
{More Info}
Box Dimensions: (mm) W 120 x D 200 x H 380
Inlet/outlet: 1/4"
Filter Replacement
Pre-filters should be replaced every 6 months or 2500 gallons (or when visibly dirty). If any of your pre filters are exhausted, using the unit will put additional pressure on the membrane. Filters are much cheaper to replace than a damaged membrane, which are also available on the website.
Membranes should be changed every 12 months
{Replacement Filters}
This System Replacement Filters
{Delivery info}
We endeavour to process and dispatch your orders as quickly as possible and orders placed before 1pm are normally despatched the same day to arrive next working day (Highlands and Islands deliveries normally take 1-2 days longer).
Your order will be delivered via a third-party courier or delivery service on a next working day delivery service. We recommend that you ensure you have received your order prior to booking any installers.
All orders come with full tracking details and you can keep an eye on your delivery by using the tracking button at the top of the website.
