Indra-Pro 300 (Nanometix) Undersink Water Filter Kit

Product ID:

230

Price:£166.49

Quantity:

Osmio Indra-Pro 300 (Nanometix) Undersink Water Filter

This is the top of the range installed inline system for an existing cold tap. It uses a 0.2 micron Nanometix filter and a limescale and heavy metal filter to achieve a thorough reduction of bacteria, chlorine, heavy metals and more!

It reduces pressure and flow rate of your water to tap (Approx. 0.2 Bar) , so it is not recommended if you have very poor flow/low pressure. Slower flow means better water so it is good to live with that!

The Indra-Pro 300 (Nanometix) Water Filter System is a ideal water filter system for installing under the kitchen sink. The system has no need for a separate tap as it will filter all the water coming from your existing kitchen tap. This is because the Indra-Pro 300 Nanometic System uses 15mm push fittings for the 1/2" BSP female inlet and outlet. This means your 15 mm copper or plastic pipe can simply be pushed into the unit and released with ease.

The Indra-Pro 300 Nanometic therefore makes a perfect solution for an easy installation as it can be fitted in less than 15 minutes.

Filter 1: Nanometix Water Filter Cartridge - changed every 12 month
NanoMetix® is a unique technology designed to provide the highest quality drinking water possible from a single stage block filter. NanoMetix® will reduce a wide variety of drinking water contaminants.
NSF Standard 42 Certified - Material Requirements - NSF 61 Certified materials - Meets or Exceeds NSF/ANSI Standards 42 & 53 for the following;

99% Chloramine reduction - 3ppm challenge, 99% Chlorine reduction, 99% Lead reduction, 98% Heavy metal reduction, 98% THM's (Trihalomethanes) reduction, 98% VOC reduction, 98% Glyphosate reduction, 98% Pesticides & Herbicides reduction, 99% Pharmaceutical compounds (ANSI/NSF Standard 401), 99% Fluorinated Organic Acids (PFOA & PFOS), 99% Micro plastics, 95% Per and Polyfluoroalkyl substances (PFAS) , 94% Radionuclides reduction, 92% Nitrates reduction, 92% Fluoride reduction - All types - Fluorosilicic acid/hydrofluorosilicate, sodium fluorosilicate, and sodium fluoride

Filter 2: Chlorine & Limescale Filter - changed every 6 month
This 2.5 x 10 Limescale & Chlorine Filter incorporates granular activated carbon (GAC) which is combined with Phosphate and De-alk resin. The filter is effective against chlorine, taste and odour, heavy metals e.g. lead, and will also tackle hard water, which is seen as limescale in kettles and as an unsightly scum on the surface of hot drinks. Water hardness varies greatly depending upon location, so the filter will need to be replaced at 3 - 6 monthly intervals or longer all of which entirely depends on the hardness of your water and the amount you use
.
Reduction capacity for limescale 1080 Litres @ 150ppm Total Hardness - 500 Litres @ 300ppm Total Hardness

Dimensions: H-400mm x W-300mm x D-130mm

{Whats in the box!}
The Full Kit includes

1 x 10" Dual Housing with 1/2" BSP Brass Female Ports
1 x Nanometix Filter
1 x Limescale & Chlorine Filter
1 x Euro Design Faucet
1 x 1/2" (male-female) Feed In Valve with 1/4" Adaptor
2 x 1/2" Male to 1/4" Push Fit
2 metres of 1/4" Tubing

{Technical}
Coldstream CF108W Ceramic Filter plus Limescale & Chlorine Filter
Minimum incoming pressure is 3 bar
If using a separate tap however 2 bar will suffice
Dimensions are width 30 cms depth 13 cms height 40 cms
Maximum Flow rate is 4 LPM
Filter life for Coldstream every 6 month
Filter life for Limescale and Chlorine is 3-6 months
Filters Bacteria, E-Coli, Chlorine, Sediments, Nitrates, Flouride, Limescale, Hormones, Pharmaceuticals, Heavy Metals

{Downloads}

{Replacement Filters}

This System Replacement Filters

Osmio 2.5" x 10" Chlorine & Limescale GAC Filter Kit (Dual Pack)

£54.00

Nanometix OBE Filter 2.5" x 10" Filter

£94.80

{Delivery info}
We endeavor to process and despatch your orders as quickly as possible and orders placed before 1pm are normally despatched the same day to arrive next working day (Highlands and Islands deliveries normally take 1-2 days longer).

Your order will be delivered via a 3rd party courier or delivery service on a next working day delivery service. We recommend that you ensure you have received your order prior to booking any installers.

All orders come with full tracking details and you can keep an eye on your delivery by using the tracking button at the top of the website.