The Osmio PRO-II Advanced Whole House Water Filter System (Dual 20")The PRO-II Advanced is one of our top of the range and finest whole house water filter system for those seeking nothing but the very best. Drink filtered water from any tap throughout the house with no need for filter jugs or a separate drinking outlet.
This water treatment system treats all of the incoming water at point of entry after the stop tap. Wash, cook, drink and clean with high quality filtered water all day every day.
Flow Rate: 35 LPM - Ideally suited to medium or large properties.
Benefits
High Quality & Best Rated Whole House Water Filter System which delivers results
Active Ceramic & Carbon Filtration reduce a wide range of impurities to make healthier water for your home
Ideal for small, medium to large home with pipework up to 1” diameter.
Unit will remove or reduce chlorine, toxins, heavy metals, hormones and fluoride.
Effective at killing and containing bacteria in water such as E-coli, Pseudomonas etc.
Produces pH enhanced water with minerals and increased alkalinity.
Increases anti-oxidants in the water too.
Environmentally friendly due to long life nature and less going to landfill.
Can be floor standing or wall mounted
No more bottled water! Naturally degradable ceramics which can be scattered on lawn and plants at end of life for improved soil drainage and plant growth.
FeaturesHigh Quality Virgin Polypropylene, thick, heavy weight and robust filter housings that stand the test of time moreso than other lighter, thinner housing that are mixed with calcite.
Brass threaded 1" BSP female ports make reliable plumbing connections, unlike plastic threaded ports which easily crossthread when connected to brass male fittings.
Integrated pressure release buttons to release air pressure.
No ongoing maintenance or need to backwash system, simply replace cartridge at end of life at low cost.
Can be wall or floor mounted.
Filter Housing 1 - Active Ceramics Filter. Active Ceramics Large Whole House Filter which uses an advanced formulation of active-ceramics which are highly effective at reducing a wide array of water impurities including chlorine, toxins, heavy metals, hormones and fluoride
This filter is replaced every 3 years or 300,000 litres and is highly effective at the removal or reduction of a vast array of impurities in water including chlorine, hormones, fluoride, lead and so on. This filter is also highly advanced and effective at killing and containing bacteria in water such as E-coli, Pseudomonas and other microorganisms.
The filter uses a unique filtration method using a patented active ceramics blend, it has 4 different active ceramics which treat the water in a different way and is completely unique.
Not only that, but the filter adds antioxidants and minerals back into the water after filtering and additionally makes water more alkaline by raising the pH value, usually increasing the pH to around 0.5 a point or more (however this could be more or less depending on a number of specific variables including the presence of certain dissolved solids and gases).
Filter Housing 2 - Carbon Block 5 Micron Filter. Carbon Block Filter: Reduces Chlorine/Taste/Odour (CTO) and certain Volatile Organic Chemicals (VOC) from drinking water using coconut base carbons for a sweeter taste
This filter further reduces chlorine and any taste and odour issues that may be present in the mains tap water. The carbon block also reduces certain Volatile Organic Chemicals (VOC) from drinking water. The coconut base of the carbon also makes a slightly sweeter taste which is pleasant.
The carbon block has a very high dirt holding capacity with virtually zero pressure drop.
Active Ceramics:: 3 year filter life or 300,000 litre capacity. Life of filter may vary depending on water hardness and local water quality.
5 Micron Carbon Block - filter life 6 to 12 months depending on usage.
Full Kit includes filters, full flow black line housings with 1" BSP female ports, brackets with screws and large housing spanner.
Note: A typical 3-4 bed house can use between 25-40 litre per minute depending on amount of people and appliances.
For example;
kitchen tap: 9-13 LPM
shower: 9-13 LPM
Washing machine: 13-20 LPM
Dishwater: 9-18 LPM
{Technical}
Housing SpecificationsStraight thread design on sump EPDM O-ring
Max Pressure: 90 psi (6.3 bar)
Max Temperature: 125°F
Service Flow Rate: up to 35 LPM @ 60 psi
Inlet/Outlet: 1"
Housing Options: Pressure Relief
Standing pressure loss ~0.5 Bar at 2.2 bar pressure
The system once assembled has the following dimensions
Depth: 21 cm - Width: 39 cm - Height: 46 cm
Allow 2" extra for mounting
System is supplied as two separate housings to enable greater flexibility when installing the system (e.g. when installing in an L-Shape or one on top of the other).
MaterialsCap : Polypropylene
Sump: Styrene Acrylonitrile
Button Assembly 300 series stainless steel, EPDM, Polypropylene
O-Ring: EPDM
The material of the spheres is approved by the Water Research Centre under the Water Bylaws scheme for use in contact with potable water. NSF approval has also been granted. The active ceramic media has been tested by South West Water Laboratories for microbiological removal and certified for bacterial removal.
Pressure Loss: To help avoid any potential disappointment with resulting pressure loss, we advise not to install this system if your standing water pressure is lower than 1.5 bar.
{Downloads}
{Replacement Filters}
{Delivery info}
We endeavor to process and despatch your orders as quickly as possible and orders placed before 1pm are normally despatched the same day to arrive next working day (Highlands and Islands deliveries normally take 1-2 days longer).
Your order will be delivered via a 3rd party courier or delivery service on a next working day delivery service. We recommend that you ensure you have received your order prior to booking any installers.
All orders come with full tracking details and you can keep an eye on your delivery by using the tracking button at the top of the website.
