Osmio Pro Dual Whole House Water Filter SystemThe Osmio Pro 4.5 x 10 Inch Dual Whole House Water Filter System is a top of the range Whole House Water Filter System and comes complete with the filters and accessories you need (besides the additional plumbing & fittings required).
The system will provide 5 micron protection and complete chlorine reduction using the NSF Certified 5 micron Carbon Block.
Benefits
Filters include sediment for the removal of sand, particles, rust, silt, lead dust and microplastics and carbon block to reduce Chlorine/Taste/Odor (CTO) and certain Volatile Organic Chemicals (VOC) from drinking water using coconut base carbons for a sweetertaste
The system comes complete with two black 4.5 x 10 Inch filter housings with Brass female 1" BSP screw ports - suitable for any pipe type or size up to 1" (15mm, 22mm, 25mm, 28mm).
The housings come with a set of screws, a thick high quality metal bracket and housing spanner. We also include a 1" male nipple (plastic) so you can connect the system side by side if you desire.
The system can also be arranged in any way that fits your space.
The system also comes of course with the two filters
Can be floor standing or wall mounted
Filter StagesStage 1 - Pleated 5m Sediment filter - surface filter reduces any suspended solid to 5 microns. These include sand, particles, rust, silt, lead dust and microplastics.
Stage 1 - Coconut Carbon Block 5 Micron - with 12,000 Iodine rating our Carbon Block Whole House FIlter is NSF Certified and made from the best indonesian coconut shells.
Both filters are typically changed every 6 months.
The system also protects your water heater, washing machine, refrigerator, ice-maker, and other appliances from the build-up of sediment, dirt, and rust.
1 x 10” Full Flow (Blue) 10” housing system (1” BSP ports") & spanner NSF Certified
1 x 4.5 x 10 Carbon block 5 mic NSF Certified
1 x 4.5 x 10 pleated 5 mic NSF Certified
Note: A typical 3-4 bed house can use between 25-40 litre per minute depending on amount of people and appliances.
For example;
kitchen tap: 9-13 LPM
shower: 9-13 LPM
Washing machine: 13-20 LPM
Dishwater: 9-18 LPM
{Technical}
Housing Specification:Straight thread design on sump EPDM O-ring
Max Pressure: 90 psi (6.3 bar)
Max Temperature: 125°F
Service Flow Rate: up to 35 LPM @ 60 psi
Inlet/Outlet: 1"
Housing Options: Pressure Relief
Dimensions
Height: 14 "
Width: 7-1/4 "
Materials
Cap : Polypropylene
Sump: Styrene Acrylonitrile
Button Assembly 300 series stainless steel, EPDM, Polyproylene
O-Ring: EPDM
Carbon Block:Thick wall carbon construction for superior performance. Low cost for economy!
Reduces Chlorine/Taste/Odor (CTO) and certain Volatile Organic Chemicals (VOC) from drinking water using coconut base carbons for a sweeter taste.
Very high dirt holding capacity
Zero carbon fines
Virtually zero pressure drop
Specifications:Micron Rating: 5 Nominal
Dimensions: 10" x 4.5"
Filter Media: Coconut Base Carbon
Netting: Polypropylene
Filter Life: 10,000 Gallons; Recommended filter change every 6 months.
Pressure Loss: To help avoid any potential disappointment with resulting pressure loss, we advise not to install this system if your standing water pressure is lower than 1.5 bar.
{Downloads}
{Replacement Filters}
{Delivery info}
We endeavor to process and despatch your orders as quickly as possible and orders placed before 1pm are normally despatched the same day to arrive next working day (Highlands and Islands deliveries normally take 1-2 days longer).
Your order will be delivered via a 3rd party courier or delivery service on a next working day delivery service. We recommend that you ensure you have received your order prior to booking any installers.
All orders come with full tracking details and you can keep an eye on your delivery by using the tracking button at the top of the website.
